|
- verilog - What does always block @ (*) means? - Stack Overflow
The (*) means "build the sensitivity list for me" For example, if you had a statement a = b + c; then you'd want a to change every time either b or c changes In other words, a is "sensitive" to b c So to set this up: always @( b or c ) begin a = b + c; end But imagine you had a large always block that was sensitive to loads of signals Writing the sensitivity list would take ages In fact
- verilog always, begin and end evaluation - Stack Overflow
The expression always @* begin : name_of_my_combinational_logic_block code end describes combinational logic Typically the clk and rst signals are not read from inside of this type of always block, so they don't appear in the sensitivity list like wisemonkey says It is best practice to use @* for the sensitivity lists of combinational logic so that you don't forget to include a signal
- Verilog Always block using (*) symbol - Stack Overflow
The always @(*) syntax was added to the IEEE Verilog Std in 2001 All modern Verilog tools (simulators, synthesis, etc ) support this syntax Here is a quote from the LRM (1800-2009): An incomplete event_expression list of an event control is a common source of bugs in register transfer level (RTL) simulations The implicit event_expression, @*, is a convenient shorthand that eliminates these
- Verilog (assign in always) - Stack Overflow
Always use blocking assignments for combinatorial or level-sensitive code, as well a clock assignments Always use non-blocking assignments for variables that are written on a clock edge, and read on the same clock edge in another process
- How do I run Visual Studio as an administrator by default?
I recently discovered that even while logged into my personal laptop as an administrator, Visual Studio does not run in administrator mode and you need to explicitly use Run As Administrator Is t
- How do I force Kubernetes to re-pull an image? - Stack Overflow
Using images tagged :latest imagePullPolicy: Always is specified This is great if you want to always pull But what if you want to do it on demand: For example, if you want to use some-public-image:latest but only want to pull a newer version manually when you ask for it You can currently:
- Difference among always_ff, always_comb, always_latch and always
I am totally confused among these 4 terms: always_ff, always_comb, always_latch and always How and for what purpose can these be used?
- Format number to always show 2 decimal places - Stack Overflow
Format number to always show 2 decimal places Asked 14 years, 1 month ago Modified 1 year, 5 months ago Viewed 2 2m times
|
|
|