Mustang II front end control arm spring problem | The H. A. M. B. When the correct spring is installed, what you should see when the car is on the ground fully loaded is, The bottom of the "A-Arm's" or "Arm that the strut Rod connects to" will be level with the crossmember, when looking at the front of the auto, from left to right
Customs Need information on Muncie M20,21 and 22 - The Jalopy Journal The M22 is a H D version of the M21 having 22 degree helix on the gears vs 45 degree on the M21 [so the M22 is noisier] and a higher nickel content This reduces front rear thrust when torque is applied but required high radial load bearings [more rollers]
How much hp does it take to turn a blower - The Jalopy Journal Back when there was a war between helix and screw blowers At that time, Bob Drazey (PSI superchsrgerd) ran Hemi engines on a dybo Results showed that a 14 71 helix blower used 735 HP to turn with air temp of Around 350f The screw blower used 275 HP with air temp of 175f Blowers use power! You GUESS how much Mouse