|
- RTJ material chart - Smith Gaskets
RING TYPE JOINTS The gasket hardness is carefully controlled and shall always be softer than the mating flanges to ensure a good seal and no damage to the flange surface (note: RTJ gaskets should not be re-used) All SMITH RTJ gaskets are manufactured from fully traceable materials and are stamped to the requirements of API 6A and ASME B16 20
- PowerPoint Presentation
Ring Joint Styles The original ring joint design can be used on standard flat bottomed groove flanges and older round bottomed groove flanges Can be used for ASME B16 5 flange class 150 to 2500 and API 6B to Class 5000 Soft iron and carbon steel gaskets are zinc plated to prevent corrosion
- Octagonal Ring Joint Gasket-SOFT IRON
Wealson manufactures and supplies a large variety of ring joint gaskets The RTJ standard size gaskets are manufactured in accordance to API-6A and ASME B16 20 specifications API ring Joint gaskets come in two basic types, an oval cross section and an octagonal cross section These basic shapes are used in pressures up to 10,000 psi Read More "Octagonal Ring Joint Gasket-SOFT IRON"
- RING TYPE JOINT GASKETS
The gasket material should be selected to suit the service conditions It is always recommended that the gasket material be softer than the mating flanges The more popular Ring Type Joint materials, with the recommended maximum hardness and identification as specified in API 6A, are shown in the table below
- RTJ - KLINGER
RING JOINT MATERIALSRING JOINT STYLES
- RING TYPE JOINT GASKETS
The gasket material should be selected to suit the service conditions It is always recommended that the gasket material be softer than the mating flanges The more popular Ring Type Joint materials, with the recommended maximum hardness and identification as specified in API 6A, are shown in the table below
- Ring Type Joint - Calvo Sealing
DESCRIPTION Ring Type Joints are metal ring to be used with elevated pressure and tem-perature applications The sealing contact area results very reliability Sea-ling gasket contact surface, as well as flange surface, have to be machined and finished Ring Type Joint materials should not be forced or laminated, and should not have irregularities Sealing hardness must be 30 HB less than
- China Octagonal Oval Ring Joint Gasket Manufacturer - Teflex
Ring Type Joint Gasket Can Use Different Material Such As Soft Iron, Low Carbon Steel, Stainless Steel304, SS316L, 347, 410, F5, S31803 (F51), Inconel 625 825 Etc RTJ Flange Gasket That Has Been Torqued Initiating A Metal-to-metal Seal Should Be Discarded And Not Reused BX RX RTJ Gasket to Meet Your Different Working Conditions
|
|
|