|
- STIHL Stihl 011 AVT - Looking for Info Help - opeforum. com
FWIW I've never turned a wrench on an 011 but I did on an 012 a few years back Funky carb,rebuild and a broken throttle cable and a dull chain That and a 49 CC J-Red That BTW has been the only J-Red I've tinkered on Much to my surprise the one and only Stihl dealerships of many locally I do business with had the cable in stock for a whole 12
- Stihl MS192T MS193T mods, rebuilds, upgrades
The impulse line will crack and sometimes come loose from the fitting behind the flywheel Fairly easy fix, but use the OEM Stihl hose (bulk, cut to 80mm length) and the spring insert to keep the hose from collapsing and kinking Ignition screws come loose and the ignition rubs on the flywheel Usually ruins the ign unit
- STIHL - MS241C Review - Outdoor Power Equipment Forum
Last year, I decided I wanted a new saw (Stihl only, that's what I grew up with) I have a 009, a MS180C and a MS290 The 009 is a great little limbing top handle, but it's old, and as they tend to do, it runs rich and it's to the point it floods out while running
- stihl 034 036 | Outdoor Power Equipment Forum
The 034 Super and 036 have the same P C Power wise the 034 Super and 036 are the same (according to my Stihl 034 036 manual) with 4 6 BHP They are some of the best saws that Stihl ever made Reactions: president , CrystalRiver1 , Heffalump and 5 others
- Stihl 064 AV vs. 056 AV Magnum II | Hearth. com Forums Home
I'd be leaning towards the 064 too (and I am an old skool, Stihl magnesium-bodied saw freak-a-zoid, ask around) so the 056 is a dream saw for my barn someday The 064 has a lot of 066-660 cross-compatible parts, and doing like AC said (066-660 piston cylinder) on that 064 would make it an animal, good enough for cutting or milling almost anything
- Stihl ms391 woes | Outdoor Power Equipment Forum
I recently acquired a stihl ms391 from an elderly man that does small engine repair He said he installed new piston rings and a new coil, but he’s not sure it was the right coil He also played with the coil gap It does currently have spark and fired a couple times Sometimes the decomp pops
- Stihl pole saw questions | Hearth. com Forums Home
The 3 8" chain used on small saws is 3 8" Low Profile, AKA 3 8" Picco if you're using Stihl-branded chain It is a light-du t y chain with small teeth and requires the smaller files 13 64" is the file size used for the standard 3 8" chain used on much larger saws, 60cc and up
- Stihl 4-mix FS-110 Low Compression - Barely Runs
I received this from one of our volunteer trail crew with the complaint that it would barely run New air filter, sparkplug, OEM carburetor, cleaned spark screen made no difference Valves were a bit loose but adjusting them also made no difference Pulling the rope feels weak even for a 4-mix
|
|
|