|
- Prestressing steel — Part 1: General requirements - guneycelik. com. tr
This document prEN 10138-1 has been prepared by Technical Committee ECISS TC 19 “Concrete reinforcing and prestressing steels - Properties, dimensions, tolerances and specific tests”, the secretariat of which is held by DIN This document is currently submitted to the COCOR Vote
- strand for the prestressing of concrete – Specification restressing
This standard has been revised to follow BS EN 10138-1 (in preparation) Definitions, symbols, steelmaking and manufacturing processes, routine inspection and testing, test methods, identification of the manufacturer and technical class and verification of mechanical properties in the case of dispute may be taken from BS EN 10138-1, when published
- Standards for reinforcement - Concrete Centre
This standard defines three grades of reinforcement conforming to the now withdrawn BS EN 10080: B500A, B500B and B500C The characteristic yield strength is set at 500 MPa and the tensile properties and ductility of the three grades are described in Table 1
- DSF FPREN 10138-1 - Prestressing steels - Engineering360
This part of prEN 10138 specifies general requirements for uncoated high tensile strength steel products, which are widely used for the prestressing of concrete and are also used for other tensile applications in the construction field
- EN 10138 Test Standard for Prestressed Steels - laboratuar. com
EN 10138-1 - Prestressed Steels - Part 1: General Requirements This part of the EN 10138 standard specifies general requirements for uncoated high tensile steel products commonly used for prestressing concrete as well as for other tensile applications in construction
- PRESTRESSED CONCREAT STEEL STRAND (EN -10138) - ALRECO
Norms: EN-10138 2, 3 and 7 wires steel strand (Ø9 53; Ø11 11; Ø12 70; Ø15 24 mm) Inner diameter: 760mm and Outside diameter: 1 400mm Coil's weight: 2 500-3 500Kg and Coil's width: 760mm C Aneto, 8-F nave 2 Polígono Valdeconsejo Tel Fax: +34 876 26 10 57 50410 Cuarte de Huerva – Zaragoza – España www alreco es
- EN 10138-1 prA1 - Genorma
The purpose of this amendment to Part 1 of EN 10138 is to supplement this document with the modifications needed by the introduction of the specific requirements for quenched and tempered steel bars in straight lengths supplied in the processed condition and in technical (strength) classes 1070 MPa and 1200 MPa and dimensional range from 30 mm
- FINAL DRAFT FprEN 10138-1 - antpedia
Spannstähle - Teil 1: Allgemeine Anforderungen This draft European Standard is submitted to CEN members for formal vote It has been drawn up by the Technical Committee ECISS TC
|
|
|