|
- why my pi camera module 2 doesnt work when i install driver for my . . .
I have a Raspberry pi 3b, a pi camera module 2, and a waveshare 3 5 (C) screen in gpio by following the official waveshare tutorial to make the screen work, I have to install the Raspberry under os bullseye 32 bit (Legacy) before any setup of the screen, I check that the camera still works well under this OS, so I test the command "raspistill
- mouse - Getting Right click on Waveshare touchscreen - Raspberry Pi . . .
I have fitted this Waveshare 10 inch LCD touchscreen to my Pi4B (buster) It all works fine but I can't find a way to achieve a Right Mouse Click Is there a way to get a right click?
- How to resolve Waveshare 1. 44 LCD HAT on Raspberry Pi Zero W2 with . . .
Questions Any idea what am I doing wrong? Are the initialization commands listed for the Waveshare 1 44 quot; LCD HAT correct? Is there anything else missing in the setup process? Current Issue I'm
- Changing the code for the Waveshare e-paper display
I'm using the Waveshare 6" kit (display and controller board) Has anyone here had any experience with the "Waveshare" ePaper displays and the code that runs them? The problem I'm having is that the dispaly only 4 seconds after I've sent the command to update the display - the actual screen update, between the old display and the new one, is
- How to configure Waveshare 7 inch display for Raspberry Pi 4
waveshare sell at least 5 different 7" displays for the raspberry pi, each with there own wiki for instructions on how to use them - all of them as far as I can tell require changes to at least config txt - so, a "standard" config txt (not sure why you even bothered to post that since it's the standard one, that everybody here would already be
- raspbian - Waveshare 2CH RS232 HAT on Raspberry pi 4 not sending nor . . .
Recently i'm using 2 Channel RS232 Hat from waveshare placed on top of raspberry pi 4 And i already follow all the instruction on this waveshare's wiki but, until right now i can't send nor receive message on dev ttySC0 and dev ttySC1 eventhough they're already in dev please kindly help me on this problem the details are: uname -a
- 1. 8 inch Waveshare LCD screen showing wrong colors on Raspberry Pi Pico . . .
I recently connected a Raspberry Pi Pico W to a 1 8 LCD screen from Waveshare The screen seems to work fine and is quite responsive, but the colors seem to be wildly different from what is coded For example, LCD BLUE, which should display blue, is displaying yellow I used the demo code from Waveshare which is given below
- Problems writing nuttx to waveshare rp2040 zero (or, how to diagnose . . .
I have a waveshare rp2040 zero I would like to start working with nuttx on this board I have configured nuttx like this: tools configure sh waveshare-rp2040-zero:nsh The software builds without
|
|
|