|
Canada-0-ComputersNetworking Κατάλογοι Εταιρεία
|
Εταιρικά Νέα :
- 2-sided (duplex) documents print upside down - Brother USA
This will affect how the text is printed on the page Depending on your document's configuration, you may need to try several different 2-sided duplex types to acheive the desired results
- 2-sided (duplex) documents print upside down - Brother USA
2-sided (duplex) documents print upside down If your duplexed documents are printing upside down, then you're likely using a generic printer driver Many of the features of your Brother machine's printer are only available if you're using the Brother Original printer driver (Windows) or the Brother CUPS printer driver (Macintosh)
- Skewed, slanted, or crooked copies and scans - Brother USA
c Using the document guidelines on the left and top, place the Printer Settings report face down in the upper left corner of the scanner glass d Press (Copy) on the Touchscreen e Press Start - If the copy comes out straight, the issue has been resolved - If the copy comes out skewed, slanted, or crooked, go to WARRANTY AND SERVICE
- When printing checks the information is shifted, misaligned, or missing
Windows Users This issue can occur if you're using a generic printer driver, or if the Brother Original printer driver's scaling option is turned on 1 Make sure you're using the Brother Original printer driver and not a generic printer driver Click here for instructions 2 If you're using a Brother driver, make sure the scaling option is turned off: a Open the Printers Folder b Right
- Remove the thick black horizontal line from the top of my scans when . . .
Make sure the carrier sheet is not loaded into the scanner upside down When using the carrier sheet, scan only one document at a time A replacement Carrier Sheet is available at https: www brother-usa com Set the document in the left of the Carrier Sheet and align the top of the document with the top of the carrier sheet
- Copies or scans are skewed, slanted, or crooked - Brother USA
a Lift the document cover b Using the document guidelines on the left and top, place the User Settings report face down in the upper left corner of the scanner glass c Close the document cover d Press on the Touchscreen e Press Start - If the copy of the User Settings report is not skewed, the issue is resolved
- Labels feed backward - Brother USA
The machine did not sense the black mark on the backside of the label This could occur if the label roll is not installed correctly or the label roll is not manufactured by Brother The limited warranty does not apply to any problem caused by the use of unauthorized third party labels or tapes 1 Press the on off button to turn the machine off 2 Open the top cover by lifting up the two
- Skewed, slanted, or crooked printed pages - Brother USA
- If the metal rod is present and NOT damaged, go to step 4 - If the metal rod is missing or damaged, this is causing the pages to print skewed, crooked, or slanted The drum unit will need to be replaced with a new, genuine Brother drum unit (DR730) 4 Push the toner cartridge firmly into the drum unit until you hear it lock into place 5 Install the drum and toner assembly back into the
- Image displays incorrectly - Brother USA
10 If the image is upside down or backwards, rotate the image using the "Rotate" button on the Control Box
|
|