|
Canada-0-ComputersNetworking Κατάλογοι Εταιρεία
|
Εταιρικά Νέα :
- How to unflash a sd card - balenaEtcher - balenaForums
Hi for a project i used etcher to flash a 2GB file into a 8GB sdcard now my sd card is ±50MB and i want my sdcard to return into 8GB Can you help me? PS:sorry if my english is bad i’m belgium
- Launching belanaDash on a non-standard TFT screen (some success)
Hello Gurus, I bought a cheap TFT 480x320 touchscreen from eBay advertised for use with Raspberry Pi 4 Understanding that there are some challenges there, I did make great progress and I’ll cover that Challenge: I can’t seem to get past the balena logo being shown on the screen to show a web page specified in LAUNCH_URL environment variable The logs say it’s showing, it’s just
- Raspberry Pi 5: activate both camera ports cam0 and cam1
Hi there, I have two Raspberry Pi HQ Cameras connected to my Pi 5, but only one works… The problem is: dtoverlay cannot be configured to stay in one line, what happens is the following: BALENA_HOST_CONFIG_dtoverlay = imx477,cam0 leads to: root@8716879:~# cat mnt boot config txt extra_cmdline=cma=256M dtparam=i2c_arm=on dtparam=spi=on dtparam=audio=on avoid_warnings=1 disable_splash=1 enable
- Supervisor stuck in restart loop - Product support - balenaForums
A few hours ago the supervisor running on one of our devices started restarting endlessly I’ve attached the logs below but they dont seem particularly relevant, save for the “Received SIGTERM Exiting ” at the end Currently the system is up and operating from a user-perspective, but I’m nervous to do anything to fix the supervisor that might affect the users There is a window later
- BalenaEtcher support BTRFS - balenaEtcher - balenaForums
Does BalenaEtcher support clones with BTRFS linux format support without removing grub?
- Browser block display issues with specific monitor
I’m testing out using Balena with the browser block to display KPI screens in a manufacturing environment We currently use MeLE stick PCs running windows to display on these, but the setup is a pain, and they tend to crash a lot I’ve re-flashed some of the Stick PCs with Balena, and it’s working really well on TVs and most of our monitors we use Problem I’m currently having is with
- Bind mount custom directory - balenaOS - balenaForums
Hello, even though I haven’t seen KubeEdge before do you know what requirements does it have? Just balena-engine’s socket didn’t work? Do you see any errors that you can share with us? Also regarding your question, one can’t bind mount directories other than the allowed ones, but maybe there are other ways to make KubeEdge work scarlyon March 23, 2020, 12:04pm 4
- Jetson orin nano eMMC : UART dev ttyTHS1 not working
Hello, I can’t use the UART dev ttyTHS1 correctly I tried with a GPS or a Bluetooth over UART Everything is working as expected when I don’t use a balena based Host but doesn’t work with Balena I talk about using pin 8 and 10 I know there is this link Jetson Nano UART ( dev ttyTHS1) not working but it doesn’t provide any solution I use OS version 6 4 0 For example, with Bluetooth
- My SSD isnt detected by the program - balenaForums
I just downloaded balenaEtcher on Windows as I want to burn an image on an SSD When I press select target, only the main C drive is detected I have an additional SSD connected which also shows up under “Devices and drives” Why isn’t it detecting it? Is there anything I can do?
- Always getting Certificate Error - openBalena - balenaForums
Hi - a couple of questions - are you using this along with a domain? Also - can you confirm if you restarted the docker daemon after configuring the certificates? If yes, can you let us know what local OS are you testing this ok so that we can try and reproduce the issue HenrikW April 8, 2021, 4:13pm 7 Hi, im using this with a domain, with subdomains as described in the installation guide
|
|