|
Canada-0-LABORATORIES Κατάλογοι Εταιρεία
|
Εταιρικά Νέα :
- Silicone Vs Plumbers Putty - Love Plumbing Remodel
Plumber's putty for basket strainers, and here's why: if the sink users accidentally break the seal between the strainer and the sink, it will leak whenever there is water being held in the sink For instance, in the triple sinks in a bar, used for washing glasses
- Silicon or plumbers putty - Love Plumbing Remodel
I'm installing an acrylic tub (Duravit) For the drain and overflow, I'm torn between using traditional plumbers putty vs silicon I've been reading the pros and cons on reddit but there is no clear answer I'm using a plumbers pack for the overflow and drain shoe (basically all pvc fittings
- Pipe Dope, Plumbers Putty, or Teflon Tape? - Love Plumbing Remodel
Plumbers putty is use when installing sink drains It is a soft putty that will compress to seal between the flange and the sink Some new materials require silicon, but that's another question My personal, repeat personal, preference is pipe dope on water and gas joints, Teflon tape on air fittings
- Plumbers putty or rubber gasket under sink flange (stainless steel sink . . .
The manufacturer of the new Garbage Disposal we are installing in a couple days says IF you have a stainless steel sink do not use plumber putty under the sink flange when installing, use the rubber gasket they provide instead Well, I understand they are the manufacturer, but I am more
- Gasket or putty under bathtub drain lip? - Love Plumbing Remodel
I'm installing a new lift and turn bathtub drain The new drain is packaged with a rubber gasket, and the instructions seem to show that the gasket goes underneath the drain lip (on top of the tub) The old drain had putty in that location I've cleaned out all the old putty, and I found
- Bathroom p-trap nut with plumbers putty? - Love Plumbing Remodel
Thinking about putting in a new faucet and stopper for the bathroom sink, I discovered what looks to be plumbers putty around the compression nut on the p-trap
- Plumbers Putty and PVC - Love Plumbing Remodel
The putty will easily peel out of the threads; use a wire bristled brush and clean it Plumber's putty has a petroleum base to it so if you left it in there for years, it would of definitely turned yellow over time Why are you having to gain access to your cleanouts so often? Problem drain?
- Made mistake - plumbers putty on ABS tub drain threads - fix advice
Anyway I used the Stain-Free Oatey plumber's putty on three threads, one the tailpiece and then the overflow slip joint and drain slip joint (see pic) I now realize I should've used a silicone product
- Delta Acrylic Bathtub Drain Sealant - Love Plumbing Remodel
My solution was to put a thick bead of plumber's putty (non-petroleum based for the acrylic tub) between the drain and tub, AND ran a thick line of Blue Monster Thread Sealant around the male threads I let it sit for 24 hours before testing it, and it now holds perfectly I hope this helps someone else, because it was incredibly frustrating!
- Compression Fitting Valve - With or Without Putty
I installed 4 shut-off valves under two sinks yesterday using compression fitting valves Both sides (they are two by two under each sink) seem to have leaked one or two drops of water over night I followed the instructions carefully, cut the 1 2" copper pipe using a pipe cutter, sanded the
|
|